Dell Serial Attached SCSI Host Bus Adapter 5i Integrate Manuale Utente Scaricare il pdf (Pagina 17)

Hardware Installation 15

Connect the cable from the external enclosure to the adapter. See Figure 3-2.

NOTE: The external cable can be connected to either of the two external connectors.

Figure 3-2. Connecting the Cable From the External Enclosure

Reconnect the power cable(s) and network cables, and then turn on the system.

NOTE: Ensure that you do not connect a hard disk and tape drive to the same SAS 5/iR Adapter.

NOTE: For information on connecting your SAS 5i/R controller to a tape drive see your system’s

Hardware Owner’s Manual.

NOTE: Installing an operating system on a disk attached to the SAS 5/E is not supported.

1 cable from the external enclosure 2 connector on the adapter

KD534bk1.book Page 15 Monday, April 2, 2007 4:37 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Nessun commento

Dell Serial Attached SCSI Host Bus Adapter 5i Integrate Manuale Utente Pagina 17