
Cisco UCS C240 M4 High-Density Rack Server (Small Form Factor Disk Drive Model)
BASE SERVER STANDARD CAPABILITIES and FEATURES
11
Internal storage
devices
Drives are installed into front-panel drive bays that provide hot-pluggable access.
■ Small Form Factor (SFF) drives. The server can hold up to:
• 24 2.5 inch (63.5 mm) SAS or SATA hard drives (HDDs) or solid state drives
(SSDs) with the 24-drive backplane (with expander) server configuration,
plus two optional internal 2.5 inch SATA SSDs for booting an OS.
• 16 2.5 inch (63.5 mm) SAS or SATA HDDs or SSDs with the 16-drive
backplane (with expander) server configuration
• 8 2.5 inch (63.5 mm) SAS or SATA HDDs or SSDs with the 8-drive backplane
server (no expander) configuration.
■ The server also contains one internal USB 3.0 port on the motherboard that
you can use with a USB thumb drive for additional storage
■ UCS Storage Accelerators are also available. These PCIe plug-in flash storage
cards provide independent high-speed storage.
Cisco Flexible Flash
drives
The server supports up to two internal 64 GB or two internal 32 GB Cisco Flexible
Flash drives (SD cards).
Interfaces ■ Rear panel
• One DB15 VGA connector
• One RJ45 serial port connector
• Two USB 3.0 port connectors
• One RJ-45 10/100/1000 Ethernet management port, using Cisco Integrated
Management Controller (CIMC) firmware
• Two Intel i350 embedded (on the motherboard) GbE LOM ports
• One flexible modular LAN on motherboard (mLOM) slot that can
accommodate various interface cards
■ Various PCIe card ports (dependent on which cards are installed)
• Virtual Interface Card (VIC) ports
• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports
■ Front panel
• One KVM console connector (supplies two USB 2.0 connectors, one VGA
DB15 video connector, and one serial port (RS232) RJ45 connector)
Power subsystem Up to two of the following hot-swappable power supplies:
■ 650 W (AC)
■ 1200 W (AC)
■ 1400 W (AC)
One power supply is mandatory; one more can be added for 1 + 1 redundancy.
Capability/Feature Description
Commenti su questo manuale