Dell OpenManage Server Administrator Version 5.0 Manuale Utente Scaricare il pdf (Pagina 167)

Using the Storage Management Service 167

omconfig Controller Commands

The following sections provide the omconfig command syntax required to execute controller tasks.

NOTICE: The omconfig storage controller action=resetconfig controller=id resets the controller configuration.

Resetting the controller configuration permanently destroys all data on all virtual disks attached to the controller. If

the system or boot partition resides on these virtual disks, it will be destroyed.

Table 9-16. omconfig Controller Commands

Required Command Levels (1, 2, 3) Optional name=value pairs

omconfig storage controller

action=rescan controller=id

action=globalrescan

action=enablealarm controller=id

action=disablealarm controller=id

action=quietalarm controller=id

action=testalarm controller=id

action=resetconfig controller=id [force=yes]

action=createvdisk controller=id raid=<c| r0| r1| r1c| r5| r10|

r50> size=<number | max | min> adisk=<ADISKID>

[stripesize=< 2kb| 4kb| 8kb| 16kb| 32kb| 64kb| 128kb>]

[cachepolicy=<d | c>] [readpolicy=<ra| nra| ara| rc| nrc>]

[writepolicy=<wb | wt | wc | nwc | fwb>] [name=<string>]

[spanlength=<n>]

action=setrebuildrate controller=id

rate=<0 to 100>

action=set/jointfilesconvert/114305/bgirate controller=id

rate=<0 to 100 >

action=setreconstructrate controller=id

rate=<0 to 100>

action=setcheckconsistency controller=id

rate=<0 to 100>

action=exportlog controller=id

action=importforeignconfig controller=id

action=clearforeignconfig controller=id

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 247 248

Nessun commento

Dell OpenManage Server Administrator Version 5.0 Manuale Utente Pagina 167